Skip to content

Reset & pairing

Restarting the base station

Restarting the base station may help if OSKAR easy does not play sound or if the connection between the base station and OSKAR easy cannot be established.

  1. Turn the on/off/volume control anticlockwise until it clicks to switch OSKAR easy off.
  2. Unplug the USB-C power cable from the USB-C power connection .
  3. Wait approximately 30 seconds.
  4. Reconnect the USB-C power cable . The base station restarts.
Note: After restarting, the base station automatically reconnects to OSKAR easy when you switch it on.

Pairing the base station and speech amplifier

The base station and OSKAR easy are paired at the factory and do not need to be paired initially.

Note: If the base station and OSKAR easy do not pair or connect automatically (indicated by the flashing status LED ), this is usually due to other issues such as interference. This may be caused by other nearby devices that also use Bluetooth or Wi-Fi. Move the base station further away from these devices. See also the “Troubleshooting” chapter.

You can optionally pair the base station and OSKAR easy again.

  1. Place OSKAR easy near the base station (in the same room, a few metres away).
  2. Press the pairing button on the base station. The status LED starts flashing rapidly (pairing mode).
  3. Turn the on/off/volume control clockwise until it clicks to switch OSKAR easy on.
  4. Press and hold the speech enhancement button on OSKAR easy for approximately 5 seconds until the status LED starts flashing more rapidly.
  5. Wait until both LEDs remain continuously lit. The base station and OSKAR easy are now paired.
Note: If pairing fails, repeat the steps. Make sure that OSKAR easy is sufficiently charged and near the base station. A failed pairing attempt prevents the devices from connecting. Repeat the pairing process until it succeeds.